Frequently Asked Questions
You can view and download the full User's Guide for the RUMBA via the link below.
RUMBA User Guide | Sena
By simply pairing your phone with your Bluetooth system, you can use
the Sena Cycling App for quicker, easier setup and management.
• App Features
- Music, Device settings, Quick Start Guide, and User’s Guide.
• Download
- Android: Google Play Store > Sena Cycling App
- iOS: App Store > Sena Cycling App
The Sena Device Manager allows you to upgrade firmware and
configure settings directly from your PC. Download the Sena Device
Manager from sena.com.
Powering On and Off
Power On Power Off
Charging
Charging the Bluetooth System
Checking the Battery Level
Audible Method
Volume Adjustment
Volume is set and maintained independently at different levels for each
audio source, even when the Bluetooth system is rebooted.
Volume Up Volume Down
Initially Pairing the Bluetooth system
The Bluetooth system will automatically enter the phone pairing mode
when you initially turn on the Bluetooth system or in the following
situation:
• Rebooting after executing Factory Reset
• Rebooting after executing Delete All Pairings.
1. Press and hold the (+) Button and (-) Button for 1 second.
Phone Pairing
2. With your mobile phone in Bluetooth-pairing mode, select Sena
Rumba in the list of devices detected.
3. If your mobile phone asks for a PIN, enter 0000.
4. The Bluetooth system completes the pairing process.
1. Execute GPS Pairing in the Configuration Menu.
GPS Pairing
2. With your Bluetooth device on the GPS navigation screen, select
Sena Rumba in the list of devices detected.
3. If your Bluetooth device asks for a PIN, enter 0000.
4. The Bluetooth system completes the pairing process.
Answer a Call End a Call
Reject a Call Redial Last Number
Make a Call with the Voice Dialer
Bluetooth Stereo Music
Play/Pause
Next Track Previous Track
The Bluetooth system can be paired with another Bluetooth system for
Bluetooth intercom conversation.
Intercom Pairing
1. Press and hold the (-) Button of the Bluetooth system A and B for
5 seconds.
Pairing with Intercom B
2. Simply tap the (-) Button of any one of the Bluetooth system A and B,
and wait until intercom connection is automatically established.
When the Bluetooth system completes the pairing process, you will
hear a double beep.
You can start or end an intercom conversation with an Intercom Friend
by pressing and holding the (-) Button for 1 second.
Start/End Conversation with Intercom Friend
SIP allows you to quickly pair with your friends for intercom
communication by scanning the QR code on the Sena Cycling App without remembering the button operation.
1. Pair the mobile phone with the Bluetooth system.
2. Open the Sena Cycling App and tap (Smart Intercom Pairing Menu).
3. Scan the QR code displayed on your friend (B)’s mobile phone.
• Your friend (B) can display the QR code on the mobile phone by
tapping > QR code
on the Sena Cycling App.
4. Tap Save and check that your friend (B) is paired with you (A)
correctly.
5. Repeat steps 3-4 to pair with Intercom Friends (C)
and (D).
Firmware Upgrades
The Bluetooth system supports firmware upgrades. You can upgrade
the firmware using the Sena Device Manager. Please visit sena.com to
check for the latest software downloads.
Fault Reset
When the USB charging & data cable connects a power supply to the
Bluetooth system, the Bluetooth system will automatically be turned off
and a fault reset will occur.
Factory Reset
To erase all of your settings and start fresh, the Bluetooth system can be
restored to factory default settings using the factory reset.