Frequently Asked Questions
You can view and download the full User's Guide for the MOMENTUM PRO via the link below.
MOMENTUM PRO User Guide | Sena
Press and hold the Center Button and the (+) Button at the same time for 1 second to turn the helmet on or off.
Powering On:
Powering Off:
The Bluetooth system can be charged using many common methods via the supplied USB power & data cable:
1. Plugged into a computer’s USB port.
2. With a USB-equipped AC adapter via a wall-outlet charger.
Depending upon the charging method, the Bluetooth system will be fully charged in about 2.5 hours.
Charging the Bluetooth System
Depending upon the charging method, the system will be fully charged in about 2.5 hours.
There are two ways to check battery level:
1. Visually, with LEDs when powering on.
Battery Level - Visual Method
2. Audible method: press and hold the Center Button and the (+) Button for more than 6 seconds as the Bluetooth system powers on. A prompt will announce the remaining battery level.
Audible Method
You can raise or lower the volume by tapping the (+) Button or the (-) Button.
Volume is set and maintained independently at different levels for each audio source (i.e. phone, intercom), even when the Bluetooth system is rebooted.
Volume up
Volume down
To answer a call, tap the Center Button once.
To end/reject a call, hold the Center Button for 2 seconds.
To use the Voice Dialer, hold the Center Button for 3 seconds.
Playing Music with Bluetooth Devices
1. To play or pause music, press and hold the Center Button for 1 second until you hear a double beep.
Play/Pause Music
2. To adjust the volume, tap the (+) Button or the (-) Button.
Volume Up
Volume Down
3. To track forward or back, press and hold the (+) Button or the (-) Button for 1 second.
Track Forward
Track Backward
You can share the music you’re listening to with an Intercom Friend during an intercom conversation. To start or terminate sharing music, press the (-) Button for 3 seconds during an intercom conversation until you hear a double beep. Both you and your Intercom Friend can control music playback.
Sharing Music with an Intercom Friend during Intercom Conversation
1. Execute Phone Pairing in the Bluetooth System Configuration Menu.
2. With your mobile phone in Bluetooth-pairing mode, select Momentum in the list of devices detected.
3. If your mobile phone asks for a PIN, enter 0000.
1. Execute GPS Pairing in the Bluetooth System Configuration Menu.
Access GPS Pairing in the Bluetooth System Configuration Menu
2. With your Bluetooth device on the GPS navigation screen, select Momentum in the list of devices detected.
3. If your Bluetooth device asks for a PIN, Enter 0000.
1. Execute Second Mobile Phone Pairing in the Bluetooth System Configuration Menu.
2. With your mobile phone in Bluetooth-pairing mode, select Momentum in the list of devices
detected.
3. If your mobile phone asks for a PIN, enter 0000.
1. Execute Phone Selective Pairing in the Bluetooth System Configuration Menu.
2. With your hands-free device in Bluetooth- Pairing mode, select Momentum in the list
of devices detected.
3. If it asks for a PIN, enter 0000.
1. Execute Media Selective Pairing in the Bluetooth System Configuration Menu.
2. With your A2DP device in Bluetooth-pairing mode, select Momentum in the list of the
devices detected.
3. If it asks for a PIN, enter 0000.
A Delete All Bluetooth Pairing Information setting can be found in the Bluetooth System Configuration menu. Tap the Center Button when in this menu to Delete All Bluetooth Pairing
Information stored in the Bluetooth system.
When the Bluetooth system is not working properly, you can easily reset the unit:
1. Partially pull out the neck roll from the rear side of the helmet.
2. Locate the pinhole reset button as described below.
3. Gently insert a paperclip into the hole and tap the Fault Reset Button with light pressure.
To erase all of your settings and start fresh, the Bluetooth system can be restored to factory default settings using the Factory Reset feature in the Bluetooth System Configuration Menu.
Access Factory Reset for Bluetooth system in the Bluetooth System Configuration Menu
Up to nine people can communicate via intercom with the helmet simply by pairing their Bluetooth systems.
Pairing with Intercom Friends
1. Press and hold the Center Button of two Bluetooth systems for 8 seconds until you hear the voice prompt “Intercom Pairing”.
Pairing with Intercom B
2. Tap the Center Button on either Bluetooth system and wait until the LEDs of both turn blue.
On Either One of the Devices
3. Repeat steps 1 and 2 to pair with Intercom Friends C, D, … and J.
Last-Come, First-Served
You can start or end an intercom conversation with an Intercom Friend by tapping the Center Button.
1. Tap one for Intercom Friend 1.
2. Tap twice for Intercom Friend 2.
3. Tap three times for Intercom Friend 3 through 9 to enter into friend selection mode. Tap the (+) Button or the (-) Button to select a Intercom Friend 3 through 9. Tap the Center Button to initiate an intercom conversation with Intercom Friend 3 through 9.
Multi-Way Intercom enables conference-call-style conversations with up to seven Intercom Friends at the same time. While Multi-Way Intercom is in progress, mobile phone connection is temporarily disconnected. However, as soon as Multi-Way Intercom terminates, the mobile phone connection will be reestablished.
Starting a Three-Way Intercom Conference
You (A) can have a Three-Way intercom Conference with two other Intercom Friends
by establishing two intercom connections simultaneously.
1. Pair your Bluetooth system (A) with those of two other Intercom Friends (B & C).
Pair with Intercom Friends B & C
2. Start an intercom conversation with one of the two friends in your intercom group. For example, you (A) may start an intercom conversation with the Intercom Friend (B). Or, Intercom Friend (B) may start intercom call with you (A).
Starting an Intercom Conversation with Intercom Friend B
3. Then, you (A) can call the second Intercom Friend (C), or the second Intercom Friend (C) may join the intercom by making an intercom call to you (A).
Starting an Intercom Conversation with Intercom Friend C
4. Now you and two Intercom Friends (B&C), are having a Three-Way Intercom Conference.
Three-Way Intercom
To turn on or shut off the FM Radio, press the (-) Button for 1 second until you hear a double beep.
The “Seek” feature searches for radio stations.
1. Double tap the (+) Button or the (-) Button to search for radio stations.
Seek Stations Forward
Seek Stations Backward
2. To save to current station, press and hold the Center Button for 3 seconds until you hear the voice prompt, “Preset (#)”.
Enter Preset Selection Mode
3. Tap the (+) Button or the (-) Button to navigate through the preset numbers that you want to store.
Navigate Forward through Preset Stations
Navigate Backward through Preset Stations
4. Press and hold the (+) Button for 1 second to save the station in the preset number you choose. Or, press and hold the (-) Button for 1 second to delete the station from memory.
Save Station to the Preset Number
Delete Station from Memory
The “Scan” function automatically searches for radio stations, starting with the current station’s frequency, then up from there.
1. Press and hold the (+) Button for 1 second to scan for stations.
Scan and Save Radio Stations
2. The Sena tuner pauses at each station it finds for 8 seconds before moving to the next.
3. To save the current station, tap the Center Button. The station will be saved as the next preset number.
Save the Current Station
4. To stop scanning, press the (+) Button for 1 second.
Stop Scanning
To turn on the camera system, press and hold the Camera Button for 1 second. To turn off the camera manually, press and hold the Camera Button for 3 seconds.
Camera On
Camera Off
To start video recording, press and hold the Camera Button for 1 Second. To stop video recording, press and hold the Camera Button for 1 second.
Start Video Recording
Stop Video Recording
Below is a table of approximate video recording times to microSD card size in specific resolutions and frame rates.
When you use a new microSD card for the first time, always format it through the Camera System Configuration Menu or the Sena Camera App before using the camera. Formatting the microSD card will remove all files from the card. If you are formatting a microSD card that you have used before, back up anything you want to save before formatting.
Format SD Card
Video Mode (Default: Normal Recording Mode)
You can change the camera configuration settings of the camera system though the Sena Camera App.
In the Camera System Configuration Menu, you can choose the Normal Recording Mode or the Loop Recording Mode for the Video Mode setting.