SRL

You can check the battery level in two different ways when the headset is powering on.

LED Indicator

When the headset is powering on, the red LED flashes rapidly indicating the battery level.

4 flashes = High, 70~100%
3 flashes = Medium, 30~70%
2 flashes = Low, 0~30%

Voice Prompt Indicator

When you power on the headset, press and hold the Center Button and the (+) Button for more than 6 seconds until you hear three, high-toned beeps. Then you will hear voice prompt indicating the battery level. However, if you release the buttons as soon as the headset turns on, you will not hear the voice prompt of battery level indication.

Universal Intercom Pairing

The SRL can be paired with non-Sena Bluetooth headsets for Bluetooth intercom conversation. You can pair the SRL with only one non-Sena Bluetooth headset so if you pair with a different non-Sena Bluetooth headset, the previous pairing list will be removed.

1. Turn on the SRL and a non-Sena Bluetooth headset that you want to pair with.

2. Press the Center Button for 12 seconds to enter the configuration menu. Tap the (-) Button three times and you will hear a voice prompt saying “Universal intercom pairing”. Press the Center
Button to enter into Universal Intercom Pairing mode and the blue LED will flash rapidly and you will hear multiple beeps.

3. Perform the operation required for handsfree pairing on the non- Sena Bluetooth headset (refer to the user’s manual of the headsets you want to use). The SRL will automatically perform pairing with non-Sena Bluetooth headsets in pairing mode.

Two-way Universal Intercom

You can initiate the Universal Intercom connection with non-Sena Bluetooth headsets using the same intercom connection method as you would between other Sena headsets. Make sure that you may single tap the Center Button to begin an intercom conversation with the first intercom friend, double tap with the second intercom friend, and triple tap with the third intercom friend.

Non-Sena Bluetooth headsets may initiate the Universal Intercom connection by activating the voice dialing or using the redialing operation. You may also disconnect the existing connection by ending a call operation function (refer to the user’s manual of the headsets for voice dialing, redialing, and ending a call).

Three-way Universal Intercom

You may make a three-way Universal Intercom connection with two SRLs and one non-Sena Bluetooth headset.

1. You (A) need to be paired with a non-Sena Bluetooth headset (B) and another SRL headset (C) for the three-way intercom.

2. Start an intercom conversation with non-Sena Bluetooth headset (B) in your intercom group. For example, you (A) may start an intercom conversation with non-Sena Bluetooth headset (B). The non-Sena Bluetooth headset (B) may also start an intercom call with you (A).

3. The other SRL (C) may join the intercom by making an intercom call to you (A).

4. Now you (A), non-Sena Bluetooth headset (B), and the other SRL (C) are having a three-way intercom.

The Bluetooth audio device must be paired with the SRL. The SRL supports the Audio/Video Remote Control Profile (AVRCP), so if your Bluetooth audio device also supports the AVRCP, you can use the SRL to remotely control music playback. Not only can you adjust the volume but you can also use functions such as play, pause, next track and previous track. If the Audio Multitasking feature is enabled, you can listen to music while having an intercom conversation.

1. To adjust the volume, tap the (+) Button or the (-) Button.

2. To play or pause music, press and hold the Center Button for

1 second until you hear double beeps.

3. To track forward or track back, press and hold the (+) Button or the (-) Button for 1 second.

1. You can start an intercom conversation with one of any intercom friends by using either the Center Button or the voice command. Single tap to start intercom with the first intercom friend and double tap to start intercom with the second intercom friend. To start intercom with the third intercom friend and above, triple tap to enter into friend selection mode. Tap the (+) Button or the (-) Button to select a friend and tap the Center Button once more to initiate the intercom with that friend.

2. You can end an intercom conversation by using either the Center Button or the voice commands. Press the Center Button for 1 second to end any intercom, or use the voice command, “End intercom”. Or, you can single tap to end intercom with the first intercom friend and double tap to end intercom with the second intercom friend. To end intercom with the third intercom friend and above, triple tap to enter into friend selection mode. Tap the (+) Button or the (-) Button to select a friend and tap once more to end intercom with that friend. Also, use the voice command, “Intercom [four ~ nine]” to end each intercom.

You may make a four-way Universal Intercom connection with a couple of different configurations, 1) three SRLs and one non-Sena Bluetooth headset or 2) two SRLs and two non-Sena Bluetooth headsets.

You may have a couple of other four-way Universal Intercom configurations, 1) your headset (A), a non-Sena Bluetooth headset (B), another SRL (C), and a non-Sena Bluetooth headset (D), 2) your headset (A), a non-Sena Bluetooth headset (B), and two other SRL headsets (C and D). You may make the four-way Universal Intercom call the same way as a normal four-way intercom call.

1. You (A) may start an intercom conversation with the non-Sena Bluetooth headset (B).

2. The other SRL (C) may join the intercom by making an intercom call to you (A).

3. The non-Sena Bluetooth headset (D) may join the three-way intercom by making an intercom call to the SRL (C).

4. Now two SRL headsets (A & C) and two non-Sena Bluetooth headsets (B & D) are connected with the four-way Universal Intercom.

You may disconnect a four-way Universal Intercom using the same
way as you do in a normal four-way intercom. 

14.2.4, “End Multi-way Intercom”

No. The SRL for the Shoei Neotec II does not support custom earbuds.

The SRL2 and SRL shares the same hardware (speakers, antenna, Bluetooth module and button module) except for the microphones. The new SRL2 is designed specifically for the 2019 Shoei GT-Air II helmet and the latest version of the Shoei Neotec II.

The new SRL2 comes with two types of microphones, a wired mic and a wired boom mic.

• The wired microphone that is supplied with the SRL2 is a slimmer mic that adheres to the front inside of the Shoei GT-Air II full face helmet. You can use the wired mic if there is not enough space between your mouth and the front of helmet.

The SRL has a fixed boom microphone which is designed specifically for the Shoei Neotec II "flip-up" helmet.

The SRL is compatible with the Shoei Neotec II.