SF1

You can view and download the full User's Guide for the SF1 via the link below. 

SF1 User Guide | Sena

To power on the headset, press the Center Button and the (+) Button at the same time for 1 second while hearing ascending beeps and a voice prompt, “Hello”.

To power off the headset, tap the Center Button and the (+) Button at the same time while hearing descending beeps and a voice prompt, “Goodbye”.

 You can charge the headset by connecting the supplied USB power & data cable into a computer’s USB port or USB wall charger. You can use any standard micro USB cable to charge the unit. The charging LED turns red while charging and turns blue when fully charged. It takes about 1.5 hours to be completely charged.

LED Indicator

When the headset is powering on, the red LED flashes rapidly indicating the battery level.

4 flashes = High, 70 ~ 100%
3 flashes = Medium, 30 ~ 70%
2 flashes = Low, 0 ~ 30%

Voice Prompt Indicator

When you power on the headset, keep pressing the Center Button and the (+) Button simultaneously for about 5 seconds. Then you will hear a voice prompt indicating the battery level. However, if you release the buttons as soon as the headset turns on, you will not hear a voice prompt for the battery level indication.

You can easily adjust the volume by tapping the (+) Button or the (-) Button. The volume is set and maintained independently at different levels for each audio source even when you reboot the headset. For example, once you set the volume for mobile phone handsfree, it will not change even if you adjust the volume for your Bluetooth MP3 music. However, if you adjust the volume during stand-by mode, it will affect volume levels of every audio source.

 1. To enter the voice configuration menu, press and hold the Center Button for 10 seconds until you hear the voice prompt, “Configuration menu”.

2. By tapping the (+) Button, you will hear the voice prompt, “Phone pairing”.

3. Search for Bluetooth devices on your mobile phone. Select the Sena SF Series in the list of the devices detected on the mobile phone.

4. Enter 0000 for the PIN. Some mobile phones may not ask for the PIN.

5. The mobile phone confirms that pairing has completed and the SF1 are ready to use. You will hear a voice prompt, “Your headset is paired”.

6. If the pairing process is not completed within three minutes, the SF1 will return to stand-by mode.

1. Turn on the headset and press the Center Button for 10 seconds until you hear high-toned double beeps. You will also hear a voice prompt saying “Configuration menu”.

2. Triple tap the (+) Button and you will hear the voice prompt saying “GPS pairing”.

3. Search for Bluetooth devices on the GPS navigation screen. Select the Sena SF Series in the list of the devices detected on the GPS.

4. Enter 0000 for the PIN.

5. The GPS confirms that pairing has completed and the SF Series are ready to use. You will hear a voice prompt saying “Your headset is paired”.

6. If the pairing process is not completed within three minutes, the SF Series will return to stand-by mode.

To enter into remote control pairing mode, tap the (+) Button or the (-) Button until you hear a voice prompt, “Remote control pairing”. Then tap the Center Button to enter into remote control pairing mode. The headset will automatically exit from the configuration menu.

Go to the SF Series configuration menu.

To delete all Bluetooth pairing information of the SF Series, tap the (+) Button or the (-) Button until you hear a voice prompt, “Delete all pairings”, and tap the Center Button to confirm.

1. When you have an incoming call, tap the Center Button to answer the call.

2. You can also answer the incoming call by loudly speaking any word of your choice if Voice Activated Phone Answering (VOX Phone) is enabled, unless you are connected to intercom.

3. To end a call, press the Center Button for 2 seconds until you hear a mid-tone single beep, or wait for the called person to end the call.

4. To reject a call, press the Center Button for 2 seconds until you hear a beep while the phone is ringing.

5. There are several ways to make a phone call:

–– Enter numbers on your mobile phone’s keypad and make a call. Then the call is automatically transferred to the headset.

–– In stand-by mode, press the Center Button for 3 seconds, to activate the voice dialing of your mobile phone. For this, the voice dialing function must be available on the mobile phone.

The Bluetooth audio device must be paired with the SF Series by following the “Mobile Phone Pairing - Mobile Phone, Bluetooth Stereo Device”. The SF Series support the Audio/Video Remote Control Profile (AVRCP), so if your Bluetooth audio device also supports the AVRCP, you can use the SF Series to remotely control music playback. Not only can you adjust the volume but you can also use functions such as play, pause, next track and previous track.

1. To play or pause music, press the Center Button for 1 second until you hear a double beep.

2. To adjust the volume, tap the (+) Button or the (-) Button.

3. To track forward or track back, press and hold the (+) Button or the (-) Button for 1 second until you hear a beep.

When the SF Series are not working properly or is in faulty status for any reason, you may reset by gently pushing the pin-hole reset button on the back of the main unit. Insert a paper clip into the reset pin-hole and press the reset button for a second with light pressure. The SF Series will be switched off. Restart the system and try again. This will not restore the headset to factory default settings.

If you want to restore the headset to factory default settings, use the
Factory Reset in the configuration menu. The headset automatically
restores the default settings and turns off. Please refer to section 14.9,
“Factory Reset” for more details.