Frequently Asked Questions
You can view and download the full User's Guide for the SAVAGE via the link below.
SAVAGE User Guide | Sena
Powering On and Off
Press and hold the Jog Dial and the Phone Button at the same time for 1 second to turn the system on or off.
Powering On
Powering Off
The Bluetooth system can be charged using many common methods via the supplied USB power & data cable:
1. Plugged into a computer’s USB port.
2. With a USB-equipped AC adapter via a wall-outlet charger.
Depending upon the charging method, the Bluetooth system will be fully charged in about 3 hours.
There are two ways to check battery level:
1. Visually, with LEDs when powering on.
Battery Level - Visual Method
2. Audible method: press and hold the Jog Dial and the Phone Button for more than 5 seconds. as the Bluetooth system powers on. A prompt will announce the remaining battery level.
Audible Method
You can raise or lower the volume by rotating the Jog Dial. Volume is set and maintained independently at different levels for each audio source (i.e. phone, intercom), even when the Bluetooth system is rebooted.
Volume up
Volume down
Answer/End a Call
Reject a Call
Make a Call with Voice Dialer
Playing Music with Bluetooth Devices
1. To play or pause music, press and hold the Jog Dial for 1 second until you hear a double beep.
2. To adjust the volume, rotate the Jog dial.
3. To track forward or back, rotate while pressing the Jog Dial clockwise or counter clockwise.
Music Sharing
You can share the music you’re listening to with an Intercom Friend during an intercom conversation. To start or terminate sharing music, press the Jog Dial for 1 second during an intercom conversation until you hear a double beep. Both you and your Intercom Friend can control music playback.
sharing Music with an intercom Friend during intercom conversation
1. Press and hold the Phone Button for 5 seconds until you hear a voice prompt, “Phone pairing”.
Access Phone Pairing
2. With your mobile phone in Bluetooth-pairing mode, select Savage in the list of devices detected.
3. If your mobile phone asks for a PIN, enter 0000.
Additional Mobile Phone, GPS, MP3 Players or Sena SR10 Two-way Radio Adapter
1. To pair the second mobile phone, press and hold the Jog Dial for 5 seconds and tap the Phone Button.
Access Second Mobile Phone Pairing
2. With your mobile phone in Bluetooth-pairing mode, select Savage in the list of devices detected.
3. If your mobile phone asks for a PIN, enter 0000.
1. Turn on the Bluetooth system and the Remote Control device.
2. Execute Remote Control Pairing in the Bluetooth System Configuration Menu.
3. Enter pairing mode in the Remote Control device. The Bluetooth system will automatically connect with the Remote Control device in pairing mode. You will hear a voice prompt, “Remote control connected” when they are successfully paired.
Deleting All Bluetooth Pairing Information
A Delete All Bluetooth Pairing Information setting can be found in
the Bluetooth System Configuration menu. Tap the Phone Button when in this menu to Delete All Bluetooth Pairing Information stored in the Bluetooth system.
Access Delete All Pairings in the Bluetooth System Configuration Menu
When the Bluetooth system is not working properly, you can easily reset the unit. When the USB charging & data cable connects a power supply to the system, the system will automatically be turned off and a fault reset will occur.
Fault Reset
Factory Reset
To erase all of your settings and start fresh, the Bluetooth system can be restored to factory default settings using the Factory Reset feature.
Access Factory Reset
Up to three other people can be paired with the helmet for Bluetooth intercom conversations.
1. Press and hold the Jog Dial of two Bluetooth systems for 5 seconds until you hear the voice prompt “Intercom Pairing”.
2. Tap the Jog Dial on either Bluetooth system and wait until the LEDs of both turn blue.
3. Repeat steps 1 and 2 to pair with Intercom Friends (B), (C), (D).
You can start or end an intercom conversation with an Intercom Friend by tapping the Jog Dial.
1. Tap one for Intercom Friend 1.
2. Tap twice for Intercom Friend 2.
3. Tap three times for Intercom Friend 3.
Multi-Way Intercom enables conference-call-style conversations with up to three Intercom Friends at the same time. While Multi- Way Intercom is in progress, mobile phone connection is temporarily disconnected. However, as soon as Multi-Way Intercom terminates, the mobile phone connection will be reestablished.
Starting a Three-Way Intercom Conference
You (A) can have a Three-Way Intercom Conference with two other Intercom Friends (B & C) by establishing two intercom connections simultaneously.
1. Pair your Bluetooth system (A) with those of two other Intercom Friends (B & C).
2. Start an intercom conversation with one of the two friends in your intercom group. For example, you (A) may start an intercom conversation with the Intercom Friend (B). Or, Intercom Friend (B) may start an intercom call with you (A).
3. Then, you (A) can call the second Intercom Friend (C), or the second Intercom Friend (C) may join the intercom by making an intercom call to you (A).
4. Now you (A) and two Intercom Friends (B & C) are having a Three-Way Intercom Conference.
To turn on or shut off the FM Radio, press the Phone Button for 1 second until you hear a double beep.
The “Seek” feature searches for radio stations.
1. Rotate while pressing the Jog Dial clockwise or counter-clockwise to search down or up the station dial.
2. To save to current station, press and hold the Jog Dial for 1 second until you hear the voice prompt, “Preset (#)”.
3. Rotate the Jog Dial to navigate through the preset numbers that you want to store.
4. Tap the Jog Dial to save the station in the preset number you choose. Or, Tap the Phone Button to delete the station from memory.
The “Scan” function automatically searches for radio stations, starting with the current station’s frequency, then up from there.
1. Double tap the Phone Button to scan for stations.
2. The Sena tuner pauses at each station it finds for 8 seconds before moving to the next.
3. To save the current station, tap the Phone Button. The station will be saved as the next preset number.
4. To stop scanning, double tap the Phone Button.
