Frequently Asked Questions
Bluetooth Stereo Music
Play/Pause
• Press and hold the (+) Button for 1 second.
Track Forward
• Press and hold the (+) Button for 2 seconds.
Track Backward
• Press and hold the (-) Button for 2 seconds.
Making and Answering Calls
Answer a Call
• Tap the (+) Button.
End a Call
• Press and hold the (+) Button for 2 seconds.
Reject a Call
• Press and hold the (+) Button for 2 seconds.
Voice Dial
• Press and hold the (+) Button for 3 seconds in stand-by mode.
Pairing When the pi Is Turned On
Initially Pairing the pi
The headset will automatically enter the phone pairing mode when you
initially turn on the headset or in the following situation:
• Rebooting after executing Factory Reset.
You can view and download the full User's Guide for the PI via the link below.
PI User Guide | Sena
Powering On
• Press and hold the (+) Button and the (-) Button for 1 second.
Powering Off
• Tap the (+) Button and the (-) Button.
There are two ways to check battery level:
1) Visual Method
2) Audible Method
Charging the Headset
Volume Adjustment
Volume is set and maintained independently at different levels for each
audio source, even when the headset is rebooted.
Volume Up/Down
• Tap the (+) Button or the (-) Button.
Firmware Upgrades
The headset supports firmware upgrades.
Please visit sena.com to check for the latest software downloads.
• Download the firmware at sena.com.
Factory Reset
To erase all of your settings and start fresh, use the Factory Reset. The
headset automatically restores the default settings and turns off.
Fault Reset
When the USB charging & data cable connects a power supply to the
headset, the headset will automatically be turned off and a fault reset
will occur.
The headset can be paired with another headset for Bluetooth intercom conversation.
Intercom Pairing
There are two ways to pair the headset.
Using the Smart Intercom Pairing (SIP)
SIP allows you to quickly pair with your friends for intercom
communication by scanning the QR code on the SENA
MOTORCYCLES App without remembering the button operation.
1. Pair the mobile phone with the Bluetooth system.
2. Open the SENA MOTORCYCLES App and tap
(Smart Intercom Pairing Menu).
3. Scan the QR code displayed on your friend (B)’s mobile phone.
• Your friend (B) can display the QR code on the mobile phone by
tapping > QR code (
) on the SENA MOTORCYCLES App.
4. Tap Save and check that your friend (B) is paired with you (A)
correctly.
5. Tap Scan and repeat steps 3-4 to pair with Intercom Friends (C)
and (D).
Using the Button
Two-Way Intercom
Start/End Conversation with the Intercom Friend
- Press and hold the (-) Button for 1 second.