Frequently Asked Questions

Powering On and Off

Powering On                                                  Powering Off

mceclip0.png

Charging the Bluetooth System

mceclip0.png

mceclip1.png

Instruction is for when powering the Bluetooth system on.
Visual Method

mceclip0.png

mceclip1.png

Volume is set and maintained independently at different levels for each
audio source (i.e., phone, intercom), even when the Bluetooth system is
rebooted.

 Volume Up                                                         Volume Down

mceclip0.png

 1. Press and hold the (+) Button and Center Button for 1 second.

     Phone Pairing

mceclip0.png

2. With your mobile phone in Bluetooth-pairing mode, select Sena X1S
    in the list of devices detected.
3. If your mobile phone asks for a PIN, enter 0000.

mceclip2.png

Second Mobile Phone and GPS

1. Execute Second Mobile Phone Pairing in the Configuration Menu.

    Second Mobile Phone Pairing

mceclip1.png

mceclip2.png

2. With your mobile phone in Bluetooth-pairing mode, select Sena X1S
    in the list of devices detected.
3. If your mobile phone asks for a PIN, enter 0000.

mceclip3.png

 

Seek and Save Radio Stations

Seek Stations Forward                                      Seek Stations Backward

mceclip0.png

Enter Preset Selection Mode

mceclip1.png

  Navigate Forward through                              Navigate Backward through
  Preset Stations                                                  Preset Stations

mceclip2.png

 Save Station to the Preset Number

mceclip3.png

 

 

1. Scan for stations.
   Start Scanning

mceclip0.png

2. The Sena tuner pauses at each station it finds for 8 seconds before
    moving to the next.
3. Save the current station. The station will be saved as the next preset
    number.

   Save the Current Station

mceclip1.png

4. Stop scanning.
   Stop Scanning

mceclip2.png

 

Fault Reset

When the Bluetooth system is not working properly, you can easily reset
the unit:
1. Locate the pinhole reset button below the (-) Button.
2. Gently insert a paperclip into the hole and tap the Fault Reset
    Button with light pressure.

mceclip0.png

3. The Bluetooth system will shut down.

mceclip1.png