Frequently Asked Questions

Powering On and Off


To power on the headset, press and hold the (+) Button and the
(-) Button for 1 second. To power off the headset, tap the (+) Button
and the (-) Button.

Volume Adjustment

You can raise or lower the volume by tapping the (+) Button or the
(-) Button. Volume is set and maintained independently at different
levels for each audio source, even when the headset is rebooted.

Initially Pairing the Headset

The headset will automatically enter the phone pairing mode when you
initially turn on the headset or in the following situation:
• Rebooting after executing Factory Reset
1. Press and hold the (+) Button and (-) Button for 1 second.
2. You will hear a voice prompt, “Phone pairing”.

3. Search for Bluetooth devices on your mobile phone. Select Sena
    Snowtalk 2 in the list of devices detected.
4. If your mobile phone asks for a PIN, enter 0000.

mceclip0.png

 

Pairing When the Headset Is Turned On

1. While the headset is turned on, press and hold the (R) Button for
    10 seconds.
2. You will hear a voice prompt, “Phone pairing”.
3. Search for Bluetooth devices on your mobile phone. Select Sena
    Snowtalk 2 in the list of devices detected.
4. If your mobile phone asks for a PIN, enter 0000.

Pairing When the Headset Is Turned Off

1. While the headset is turned off, press and hold the (+) Button and
    (-) Button for 5 seconds.
2. You will hear a voice prompt, “Phone pairing”.
3. Search for Bluetooth devices on your mobile phone. Select Sena
    Snowtalk 2 in the list of devices detected.
4. If your mobile phone asks for a PIN, enter 0000.

Bluetooth Stereo Music

1. To play or pause music, press and hold the (R) Button for
    1 second.
2. To track forward or track back, press and hold the (+) Button or
    the (-) Button for 1 second.

 

mceclip0.png

Starting Two-Way Intercom

You can start an intercom conversation with one of any intercom
friends by tapping the (R) Button: single tap to intercom with the first
intercom friend, double tap to intercom with the second intercom
friend, and triple tap to intercom with the third intercom friend.

Ending Two-Way Intercom

You can end an intercom conversation with one of any intercom friends
by tapping the (R) Button: single tap to end intercom with the first
intercom friend, double tap to end intercom with the second intercom
friend, and triple tap to end intercom with the third intercom friend.

FIRMWARE UPGRADE

The headset supports firmware upgrades. You can update firmware
using the Sena Device Manager. Please visit Sena Bluetooth website
at www.sena.com to check the latest software downloads.

Fault Reset

When the headset is not working properly, you can easily reset the
unit:
1. Locate the pin-hole reset button at the back of the right speaker.
2. Gently insert a paper clip into the hole and press and Fault Reset
    Button with light pressure.

mceclip0.png

mceclip1.png