Frequently Asked Questions

Powering On and Off


   Power On                                                         Power Off

mceclip0.png

Charging


Charging the Bluetooth System

mceclip0.png

mceclip1.png

Checking the Battery Level

Audible Method

mceclip0.png

mceclip1.png

Volume Adjustment

Volume is set and maintained independently at different levels for each
audio source, even when the Bluetooth system is rebooted.

  Volume Up                                                          Volume Down

mceclip0.png

Initially Pairing the Bluetooth system
The Bluetooth system will automatically enter the phone pairing mode
when you initially turn on the Bluetooth system or in the following
situation:
• Rebooting after executing Factory Reset
• Rebooting after executing Delete All Pairings.
1. Press and hold the (+) Button and (-) Button for 1 second.
Phone Pairing

mceclip0.png

2. With your mobile phone in Bluetooth-pairing mode, select Sena
    Rumba in the list of devices detected.

3. If your mobile phone asks for a PIN, enter 0000.

mceclip1.png

4. The Bluetooth system completes the pairing process.

mceclip2.png

 

1. Execute GPS Pairing in the Configuration Menu.

GPS Pairing

mceclip0.png

2. With your Bluetooth device on the GPS navigation screen, select
    Sena Rumba in the list of devices detected.

3. If your Bluetooth device asks for a PIN, enter 0000.

mceclip1.png

4. The Bluetooth system completes the pairing process.

mceclip2.png

  Answer a Call                                              End a Call  

mceclip3.png

  Reject a Call                                                 Redial Last Number

mceclip4.png

Make a Call with the Voice Dialer

mceclip5.png

Bluetooth Stereo Music

Play/Pause
mceclip0.png

  Next Track                                                     Previous Track

mceclip1.png

The Bluetooth system can be paired with another Bluetooth system for
Bluetooth intercom conversation.

Intercom Pairing

mceclip0.png

1. Press and hold the (-) Button of the Bluetooth system A and B for
   5 seconds.

Pairing with Intercom B

mceclip1.png

2. Simply tap the (-) Button of any one of the Bluetooth system A and B,
    and wait until intercom connection is automatically established.
    When the Bluetooth system completes the pairing process, you will
    hear a double beep.

mceclip2.png

You can start or end an intercom conversation with an Intercom Friend
by pressing and holding the (-) Button for 1 second.

Start/End Conversation with Intercom Friend

mceclip0.png

Firmware Upgrades

The Bluetooth system supports firmware upgrades. You can upgrade
the firmware using the Sena Device Manager. Please visit sena.com to
check for the latest software downloads.

Fault Reset

When the USB charging & data cable connects a power supply to the
Bluetooth system, the Bluetooth system will automatically be turned off
and a fault reset will occur.

mceclip0.png

mceclip1.png

 

Factory Reset

To erase all of your settings and start fresh, the Bluetooth system can be
restored to factory default settings using the factory reset.

mceclip0.png

Here’s how to use Sena's Smart Intercom Pairing feature to make pairing your RUMBA with your friends easier:

 

Setup

A QR code is required to pair your RUMBA to your friends. To create a QR code, pair your Bluetooth system to your iPhone or Android smartphone (please refer to the User's Guide for more details on pairing the RUMBA to your smartphone). Next, open the Sena Utility App on your iPhone or Android smartphone. 

  Sena_Smart_Intercom_Pairing-Illustrations-FAQ-Launch_App.png

Next, tap on the "Smart Intercom Pairing" button. The app will create a QR code for your RUMBA.

Sena_Smart_Intercom_Pairing-Illustrations-FAQ-Open_SIP.png

Pairing

You will need to scan the QR code on your friend's smartphone to pair your RUMBA to your friend. Tap the "Add" button on the app to use your smartphone's camera to scan the QR code on your friend's smartphone. 

Sena_Smart_Intercom_Pairing-Illustrations-FAQ-Add_Friend.png

Sena_Smart_Intercom_Pairing-Illustrations-FAQ-Scan_Friends_QR_Code.png

When your friend's QR code has been scanned, tap the "Confirm" button to pair your RUMBA to your friend. Repeat these steps to pair your RUMBA to your other friends.

Select your friend's headset on the app for a guide on how to start and stop an intercom conversation with them. 

 

Other Functions of Smart Intercom Pairing

Along with easily pairing your headset to your friends, Smart Intercom Pairing allows you to change the name of your friend’s headset for easy recognition, change the order of your friends on your list, and remove your friends from your list. 

  • Change Your Friend’s Name

Tap the pencil icon on the right side of the app to change the name of your friend’s headset and tap the “OK” button when finished. 

  • Change the Order of Your Friends

Tap the “Edit” button to make changes to your list. Next, tap on the name of your friend’s headset to select it. You can use the up and down arrows to move them one spot higher or lower or you can use the double up and down arrows to move them to the top or bottom of the list. Press the return arrow in the bottom left to save the changes to the order on your list. 

  • Remove a Friend

Tap the “Edit” button to make changes to your list. Next, tap on the name of your friend’s headset to select it. Next, tap the trash can icon in the bottom right of the app to remove your friend. Press the return arrow in the bottom left to save the changes to your list. Note: The app will update the list on your RUMBA but it will not be updated on your friend’s list which will cause an error message when your friend attempts to connect to your RUMBA.