Sena is committed to provide you with essential learning, information, and documentation solutions when and where you need them. Take advantage of the wealth of learning opportunities available to you in a variety of different media for your convenience.
| This tutorial includes introduction to serial devices and networking; the need for serial device servers, typical application scenarios using Sena device servers; and Sena product line up.
|
|
| The purpose of this tutorial is to detail specs of Antennas that Sena wireless product family supports. |
|
| The purpose of this tutorial is to describe the Surge Protection supported by Sena Products. |
|
| Telnet COM Port Control Protocol RFC-2217 - [Learn More ] |
|
| The purpose of this tutorial is to describe the COM Port Control Protocol, RFC-2217 supported by Sena Products. |
|
| The latency performance test measures the elapsed time required to transmit and receive serial data between a networked PC and an Ethernet-attached device server. The test sends a packet, consisting of one byte of data, over the Ethernet network, to a remote serial device server where the data is echoed back to the originating PC. Echoing of the data is accomplished using a loop-back plug that connects the RS-232 Tx data pin to the Rx data pin. |
|
| The purpose of this tutorial is to describe the main elements in Serial Communication. This tutorial attempts to cover enough technical details of RS232, RS422 and RS485. |
|
| The purpose of this tutorial is to describe the main elements in PCMCIA Interface such as PCMCIA standards, Physical specification, Types of cards, Types of slots, Utilities of PCMCIA cards, PC Card manufacturers. |
|
| The purpose of this tutorial is to describe the main elements in the Ethernet Interface such as IEEE standards, Topology, CSMA, Wireless-LAN, Transmission Speed. |
|
| The purpose of this tutorial is to describe the main elements in MODBUS protocol such as Communication between MODBUS Devices, Register map, Serial transmission modes, Message framing, Addresses, Functions, Data Field, Error Checking, Exceptions. |
|
| The purpose of this tutorial is to describe the Protocols supported by Sena Products such as Telnet, UDP, TCP, IP/ICMP, ARP, DHCP, HTTP, SMTP, PPPoE, SSH, Kerberos, RADIUS, TACACS+ . |
|
| The purpose of this tutorial is to describe the Security Features supported by Sena Products such as SSH, Firewall, Kerberos, RADIUS, TACACS+. |
|
Copyright © 2011 Sena Technologies, Inc. All rights reserved.
