BlueFire Ltd. is a Bluetooth-based system software vendor in Hungary. BlueFire has developed SENA MSP1000-based Proximity Marketing solution. This solution is provided in the form of a firmware image, and one month free trial is available for all the equipment. This solution is differentiated from other solutions in following ways.
- Load balancing among lots of MSPs
- Localized language support
- Real-time statistical data based on WEB interface is provided and is sent to the cell phone of the administrator
- Mobile Internet support
- Upload contents and games for cell phones
1. BlueFire Firmware Download
2. Firmware upload
Log in to the administrator’s web of MSP1000. Select ‘System administration -> Firmware upgrade’ and click [OK]. Then upgrade firmware using BlueFire firmware.
It takes about 6 -7 minutes to upgrade the firmware. If firmware upgrade is completed and booting is done, do factory reset.
3. MSP1000-BlueFire IP Configuration
The default factory reset setting of IP MODE in MSP1000-BlueFire firmware version is DHCP. (In console screen, IP MODE is shown as ‘Static’)
IP is configured by serial console. For the detail, please refer to the user manual of MSP1000.
4. BlueFire configuration menu
When you log in again to WEB management system of MSP1000, BlureFire setup menu is added to left menu list.
Click ‘Go to BlueFire menu’, then ‘BlueFire configuration menu’ appears.
4.1 License status
Following web page is intro page of BlueFire page. This page says the current status of the license.
The current operation status is displayed. This page refreshes every 10 seconds.
4.3 Zone setup
Below is the Zone Service configuration page. ZoneMaster (Central management program) and ZoneClient (Bluetooth communication program) can be configured.
4.4 Content management
In this menu, contents to be transferred can be managed.
For mobile phones, VCF, GIF and JPG file formats are supported. Supported formats may vary depending on the terminals. For smartphones, most types of contents can be downloaded.
Different parameter values such as transfer time can be configured per contents.
4.5 Supervisor devices
The current system status can be sent to the administrator’s mobile phone every 5 to 7 minutes.
4.6 OBEX password
OBEX password can be set in this menu. This password is used for transferring contents by OPP.
4.7 Other menus
- ‘Lottery’ and ‘Treasure Hunt’
: A simple game menu.
- ‘Management Modems’ / ‘Manage connections’
: This menu provides the ability for the MSP1000 to connect to the Internet through mobile phone.
- ‘Network status’
: Current connection status to the Internet is shown.
: Current log data can be downloaded.
The status of Zoneclient can be monitored
For more details, please refer to BlueFire user manual.