In this month, I’d like to introduce the comparison of Wi-Fi, Bluetooth and ZigBee.
>> more
The comparison of Wi-Fi, Bluetooth and ZigBee
February 25th, 2010The mode operation setting of MSP1000 according to applications
January 28th, 2010
This article explains the operation mode settings of the MSP1000 according to the applications.
Depending on the desired applications, Bluetooth and Network mode of the MSP1000 should be configured appropriately
>> more
The Performance comparison of the Serial hub mode of MSP1000 & the multi-drop mode of SD1000
December 28th, 2009
Even though Bluetooth is one-to-one connection in its nature, if you use the SD1000 or the MSP1000, simultaneous multiple connections can be made for the multi-drop applications. This article shows the performance comparison of the Serial hub mode of the MSP1000 and the multi-drop mode of the SD1000.
>> more
Remote I/O control using Rhio10
November 27th, 2009
Rhio10 is a remote I/O management device that can communicate with remote digital sensors and actuators through 10 Base-T Ethernet network.
>> more
The communication distance comparison of stub, dipole, and patch antennas
October 28th, 2009
This month’s test is about the communication distance comparison of stub, dipole, and patch antennas when used with SENA Bluetooth products. The picture below shows the street the test was performed on.
>> more
Multiple-connection mode capability of the new coming release of SD1000 v2.0 firmware
September 29th, 2009
Multiple-connection mode capability is available with new coming release of SD1000 v2.0 firmware.
This document provides the preview of the capabilities of SD1000 v2.0.
>> more
How to replace a serial cable using Parani-ESD110s
August 28th, 2009
This article explains how to replace serial cables in legacy devices with Parani-ESD110s to make wireless Bluetooth connections.Parani-ESD110 is an embedded Bluetooth serial(UART) module, so users need to use Parani-ESD100’s Starter Kits or make user interface boards to carry Parani-ESD110s.
>> more
The console management using Parani-SD100 and Parani-MSP1000
July 27th, 2009
When system failure occurs, Parani-SD100 is installed on the failed network device and connected to the Parani-MSP1000 so an engineer can access the failed remote network device over network for recovery.
>> more
The performance test of Bluetooth USB adapter, Parani-UD100
June 29th, 2009
In this month, I’d like to introduce the performance test Parani-UD100, Bluetooth USB adapter. Two different tests are performed assuming two different use cases.
>> more
Car Diagnostic System using MSP1000 & ESD100
May 28th, 2009
MSP1000 searches car diagnostic devices periodically. MSP1000 tries to connect to the car diagnostic device via Bluetooth SPP when it is found. Once Bluetooth connection is completed, MSP1000 tries to connect to the car diagnostic server over TCP/IP network. In this way, the car diagnostic data is stored to the server.
>> more
